- First place the candle wick inside the mould and stick the lowest end to the bottom of the mould.
- Now by placing a spoon above the stove or a lighted candle rub the chalk of desired colour till it melts sufficent enough to give colour to the wax.
- Now mix the wax with it and start melting.
If you can’t find wax chips another candle would do. Cut it open using a blade, remove the wick and slice it further into small bits to make it easy to melt, like so;
- Once all wax is melted pour into the mould after adding a few drops of the desired essential oil.
Hack: To keep the wick straight and in place do as shown.
- Allow the wax to cool.
In the one shown I went for different layers of colour. To do this simply change the colour of the crayon and melt with a little bit of wax and pour over the before made layer. Make sure that the lower layer is cooled to a certain extent so that the 2 colours don’t mix. 
